Serial Number

Input content

Photoelectric properties and mechanical dimensions of 1. TFT

1

TFT Type

□TN □IPS □VA/MVA □Mono TFT □其他：

□Normally white □Normally black

2

A. Area A dimensions

      Inches

Resolution:

Lattice number:     X        Point

3

apparent direction

□ 6:00 □ 12:00 □ 3:00 □ 9:00 □ Full angle of view □ Special:

4

Temperature range

Operating temperature:      ℃ ~    ℃ Storage temperature:      ℃ ~      ℃

5

Contrast CR

□ Designated: CR =                                                             

6

response speed

□ Designated: 1) In   ℃, the maximum   ms 2) in   ℃, the maximum     ms           

7

Viewing Angle Range

Horizontal direction (TYP):3-point direction     degree 9 o'clock direction      degree;

Vertical direction (TYP):12 o'clock direction     Degree 6 o'clock direction      Degree; (Contrast> 10 in this range)

Mechanical dimensions and requirements of 2. parts

1

LED side backlight

□ No special * profit requirement

□ There are special * profit requirements

Size □ specified: long      Wide       Thick                                  

Height indicator minimum: CD/m² 2) Minimum uniformity:

Typical value of backlight driving voltage = V maximum =

Typical Backlight Drive Current = V Max =

2

TP Requirements

□ Yes □ No

□ Four-wire resistor TP □ Five-wire resistor TP □ Mobile phone capacitor TP □ Push button TP □ Special TP

Thickness requirements: mm

3

PCB Dimensions

□ Designated: long      Wide       Thick                                         

4

FPC Size

□ Designated: long      Wide       Thick                                         

5

Shell size

□ Specify: overall dimensions       Shell Window Size:                                                                             

4. drive and control characteristics

1

TFT driver IC

2

TFT controller

4

Interface mode

□ 68 Parallel □ 80 Parallel □ RGB Interface □ Serial 4-SPI □ Serial 3-SPI □ LVDS □ Others:

5

*6

Logic voltage VDD

Typical = Maximum = Minimum =

7

Drive current Idd

Typical = Maximum =

8

Drive current Ilcd

Typical = Maximum =

9

Initialization Code